PAGE - 16
INSTALLATION
Installation
CAUTION: It is always advised to contact Brand’s customer service
for Installation and Uninstallation of the Washing Machine.
Before installing the machine, the location of installation should have
the following qualities:
-Rigid, dry and levelled surface
-Avoid direct sun light
-Sufficient ventilation
-Ambient temperature should be above 0 ̊C
-There should not be an active / direct heat source close to the
machine
Levelling the Washing Machine
1.Check if the legs are properly attached to the main body. If not turn
them to their original position to tighten the nut
2.After placing the machine on the surface check for proper align-
ment using spirit level
3.Loosen the lock nut and turn the legs unit it is closely in contact with
the floor
Installing the Drain Hose
1.The drain hose should be properly connected to the outlet of the
machine and clamped tightly
2.The drain hose outlet should not be immersed in water
3.The drain hose should be fully extended and not coiled for proper
flow of the drain water
Installing the Inlet Hose
1.The inlet hose should be properly connected to the tap
2.The pressure of supply water should be between 0.03MPa to 1MPa
3.Do not over tighten the threat while connecting the inlet pipe
Summary of Contents for AR65FATLP0EC
Page 1: ......
