23
Eng
lis
h
Server IP
The Server IP indicates the IP address your projector uses to connect to a wired
or wireless network. It will be 192.168.100.10 for general wireless and wired
connections. The Server IP will be assigned by the wired network with DHCP
enabled. For more information, please see "Network settings".
NOTE: If a RJ-45 cable is not connected, the LAN IP will be 0.0.0.0.
Security: (None, WPA-PSK, WPA2-PSK)
WPA-PSK (WiFi Protected Access - pre-shared key) and WPA2-PSK are individual
encryption methods with higher level security. The option is enabled by the
supervisor in the Configure tab under Acer eDisplayPro Management. For more
information, please see "Security settings".
Note: Make sure the LAN/WiFi setting in the projector OSD is On
when using the WiFi Display.
Follow the instructions on the splash screen to
connect and project
1
Check Projector ID, Projector Name (SSID), Server IP and Security option on
the splash screen. Ask your supervisor to set safer key when Security is
enabled.
2
Enable your WLAN and select the access point labeled AcerProjector or
AcerProjectorXXXX to connect wirelessly. Connect the projector to your
LAN for a wired connection.
Internet
