manualshive.com logo in svg

Acer AM501, User Manual, Page: 11 / 12

Share
Download
Acer AM501 User Manual Download Page 11

 

 

11 

TROUBLESHOOTING 

Please refer to the following solutions for the failure symptoms that occur the most 
frequent. If the symptom remains after trying these suggested solutions, please 
contact your local authorized service center. 

Problem: Power LED is not lit when monitor is powered on. 

 

Check to make sure that the power cord is connected properly. 

 

Make sure that the extension cord or the surge protector is turned on if 
the monitor is plugged into a power extension cord or a surge protector. 

Problem: No display appears on screen. 

 

Make sure that the computer switch is in the “

On

” position. 

 

Make sure that the video cable‘s D-shaped connector is properly 
connected to the video adapter port on the back of the PC. 

 

Check to make sure that the brightness and contrast controls are not 
turned to their dimmest position. 

Problem: Display image is either flickering or unstable. 

 

Make sure that the video cable‘s D-shaped connector is connected 
properly to the video adapter port on the back of the PC.  

Problem: Image is bouncing or in a wave pattern. 

 

Move any electrical devices that can cause interference away from the 
monitor.

 

Note

: Please refers to the FCC statement at the beginning of the manual for more 

details on display interference.

Summary of Contents for AM501













Reviews:

No comments