![background image](http://html.mh-extra.com/html/acer/altos-g5450-series/altos-g5450-series_user-manual_5827079.webp)
61
Installing the ARMC/3 module
Remote system management just got easier with the new ARMC/3
module. The module provides high performance KVM (keyboard-
video-mouse) redirection and features a dedicated NIC port for faster
network access.
To install the ARMC/3 module on system board:
1
Perform the pre-installation instructions described on page 35.
2
Locate the IPMI1 slot. If necessary, remove any boards or cables
that prevent access to it.
3
If necessary, open the holding clips of the IPMI1 slot.
4
Remove the ARMC/3 module from its protective packaging,
handling it by the edges.
5
Install the ARMC/3 module.
(1) Align the module so that the notch on the IPMI1 slot fits the
keyed edge of the module, then press the module at both
ends to seat it fully into the slot.
When the module is properly installed, the holding clips will
automatically lock in place.
To install the ARMC/3 module on the BMC module:
1
Perform the pre-installation instructions described on page 35.
Summary of Contents for Altos G5450 Series
