Chapter 1 – System Board 1-21
1.11.2 Installing an AGP Card
When installing an AGP card, make sure that the IRQ required by the card is not
already assigned to a PCI or ISA device to avoid resource conflicts.
Follow these steps when installing an AGP card:
1.
Locate the AGP slot on the main board. See Figure 1-1 for the slot location.
2.
Insert an AGP card into the slot. Make sure that the card is properly seated.
Figure 1-12 Installing an AGP Card
When you turn on the system, BIOS automatically detects and assigns
resources to the AGP device.
BIOS detects and configures only PnP cards.
