Acer AL732, Service Manual

Page: 13 / 39

ADJUSTMENT PROCEDURE
ITEM
Program Menu.
# Test Meter
* Test Point
@ Pattern
Operation
Check
Value
A
B+
Check
# Digital Voltmeter
* CN7
@ Crosshatch Pattern
(31.5KHz,640x480)
1. Plug power cable into the adapter, check adapter
power indicator light up green.
2. Make sure the voltage of the power plug (
CN7
)
on the main
PCB
to the value shown at right.
12.0V
±0.2V
B
Power Saving
Check
# Wattmeter
# PC or Pattern
generator
@ Crosshatch Pattern
(31.5KHz,640x480)
1. Unplug the signal cable from the monitor.
2. Turn the power switch of the monitor ON .
3. Check monitor power indicator light up orange.
4. Make sure the wattmeter value shown under 5W.
5.
OSD
will be display “
NO SIGNAL
” Picture.
‹ 5W
C
Into Factory
mode
# PC or Pattern
generator
@ Crosshatch Pattern
(31.5KHz,640x480)
1. Hold < key,then turn the power switch of the
monitor OFF .
2. Hold > key,then turn the power switch of the
monitor
ON
.
3. You can into factory adjustment mode.
D
Auto mode
Check
# PC or Pattern
generator
@ Crosshatch Pattern
(1024x768/60Hz)
1. Press and relese the
MENU
knob to activate the
OSD
menu.
2. Move the OSD to the Auto adjust function,press
MENU key auto adjuat display mode to its utmost
performance according to VGA setting.
3. In the event of the display image needs further
adjustment
E
White
Balance
Adjust
# PC or Pattern
generator
@ White Pattern
(1024x768/60Hz)
1. Move the
OSD
to the
COLOR mode
(
AUTO COLOR
).
2. set color is 9300
°
K
using the
OSD
,Check the value
shown at below.
Y = 220 x = 0.283 y = 0.297
2. set color is 7500
°
K using the OSD ,Check the value
shown at below.
Y = 220 x = 0.299 y = 0.315
3. set color is 6500
°
K
using the
OSD
,Check the value
shown at right.
Y = 220 x = 0.311 y = 0.329
Y = 220
±0.1FL
x = 0.283
±0.01
y = 0.297
±0.01
F
OSD
Language
Setting
# PC or Pattern
generator
1. Move the
OSD
to the
LANGUAGE mode
.
2. You can choose one of the nine language you need.