background image

 

 

 

3

Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le 
matériel brouilleur du Canada.   

Important Safety Instructions

 

Please read the following instructions carefully. This manual should be retained for future 
use.  

1. 

To clean LCD Monitor screen;   
-- Power off LCD Monitor and unplug the AC Cord.   

  -- Spray a non-solvent cleaning solution onto a rag.   

-- Gently clean the screen with dampened rag.   

2. 

Do not place the LCD Monitor near a window. Exposing the monitor to rain water, 
moisture or sunlight can severely damage it.   

3. 

Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to 
the display.   

4. 

Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature 
should be performed by an authorized technician.   

5. 

Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). 
Storing the LCD Monitor outside this range could result in permanent damage.   

6. 

If any of the following occurs, immediately unplug your monitor and call an authorized 
technician.  

*    Monitor to PC signal cable is frayed or damaged.   

*    Liquid spilled into LCD Monitor or the monitor has been exposed to rain.   

*    LCD Monitor or the case is damaged.   

7. 

A certified line is required to connect this device to a power outlet. For a nominal current 
up to 6A and a device weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm

2

 

must be used. 

8. 

For use only with power supply type: Li-shin, LSE 9802A1240 

Summary of Contents for AL501















Reviews: