background image

Copyright 

 

Copyright © 200

4

 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, 

transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in 

any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the 

prior written permission of Acer Incorporated. 

 

Disclaimer 

The information in this guide is subject to change without notice. Acer Incorporated makes no representations or 

warranties, either expresses or implied, with respect to the contents hereof and specifically disclaims any 

warranties of merchantability or fitness for any particular purpose, Any Acer Incorporated software described in 

this manual is sold or licensed “as is ”. Should the programs prove defective following their purchase, the buyer 

(and not Acer Incorporated, its distributor, of its dealer) assumes the entire cost of all necessary servicing, repair, 

and any incidental or consequential damages resulting from any defect in the software. 

 
 
 
 
 
 
 
 
 
 
 
 
 

Acer is a registered trademark of Acer Corporation. 

Intel is a registered trademark of Intel Corporation. 

Pentium and Pentium II/III are trademarks of Intel Corporation. 

Other brand and product names are trademarks and/or registered trademarks of their respective holders. 

 

 
 
 
 
 
 
 
 

- 2 -   

Summary of Contents for AL2032W








































Reviews: