10.
Turn on control. Make sure all the motors are running clockwise (spindle motor,
hydraulic motor, cross-feed motor, vertical rapid motor, and coolant pump motor).
1) Release emergency button, turn on green start button. Turn chuck control on.
2) Press spindle, hydraulic and magnetic separator and paper filter system buttons
to check rotation.
3) Check cross-feed motor by pressing in and out push button while function
switch is in manual mode.
4) Check rapid vertical motor by pressing up and down push buttons while
function switch is in rapid mode.
If opposite direction, please turn off main power by pushing emergency button.
Switch any two power lines that go into the machine.
Start button
Emergency
button
Chuck
control
switch
Warning! Take out
wheel when testing
spindle rotation.
Spindle
motor on off
push button
Hydraulic
motor on off
push button
Coolant on/off
push button
Cross-feed
function switch
(in manual
mode)
In and out push
buttons
3 position
function
switch
Up-down push
buttons
Down feed Start
and off button
Position setting
push button
Variable resistor
swich
