background image

13

Positioning your monitor

Place your monitor at a comfortable viewing distance, usually 50 to 60 
centimeters away. Adjust the display in such a way that the top of the 
screen is at or slightly below eye level.

Positioning your keyboard

The location of the keyboard is a very important factor to your 
posture. Placing it too far away will make your body lean forward 
forcing you to sit in an unnatural position. Placing it too high will add 
tension to your shoulder muscles.

The keyboard should be placed just above your lap. Adjust the 
keyboard height by flipping the folding stands located under the 
keyboard.

Keep your lower arms parallel to the floor as you type. Your upper 
arms and shoulders should be relaxed. Then try typing with a light 
touch. If you feel any shoulder or neck strain, stop for a while and 
check your posture.

Position your keyboard in front of your monitor. Putting your 
keyboard beside your monitor will make you turn your head while 
you type which could add tension to your neck muscles that may 
later result in neck strain.

Positioning your mouse

The mouse should be placed on the same surface as your keyboard 
so that you can reach it with ease.

Adjust its position to allow enough space for movement without 
making you stretch or lean over.

Use your arm to move the mouse. Do not rest your wrist on the 
table when moving the mouse.

 

Summary of Contents for AcerPower ST





































Reviews: