Acer AcerPower FE, Service Manual

Page: 40 / 98

Chapter 2 36
Advanced BIOS Features
The following screen shows the Advanced BIOS Features:
NOTE: “#” System will detect automatically and show up when you install the IntelR Pentium 4 processor with
HT Technology.
Parameter Description Options
Virus Warning This feature allows you to enable the VIRUS
warning function for IDE Hard Disk boot sector
protection. If this function is enabled and there
is someone attempt to write data into this area,
BIOS will show a warning message on screen
and the alarm will beep. Enabled
Disabled
CPU L1 & L2 Cache Enabled : Enable CPU L1 & L2 Cache function.
Disabled : Disable this function.
Silent Boot This features allows you to enable or disable if
the screen logo to display or no during POST Enabled
Disabled
Configuration Table This feature allows you to enable or disable if
showing summary screen or not Enabled
Disabled
Hard Disk Boot Priority Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc. Use <
w
> or
<
y
>to select a device, then press<+> to move it up, or <-> to move it down the list.
Press <ESC> to exit this menu.
Quick Power On Self Test This feature allows the system to skip certain
tests while booting. When this function is
enabled, it will decrease the time needed to
boot the system, which means to quick power
on self test function Enabled
Disabled
First / Second / Third Boot
Device The item allows you to set the sequence of boot
device where BIOS attempts to load the disk
operating system. Floppy , LS120, Hard Disk, CD-ROM,
ZIP, USB-FDD, USB-ZIP, USB-
CDROM, USB-HDD, LAN, Disabled
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Advanced BIOS Features
Virus Warning [Disabled]
CPU L1 & L2 Cache [Enabled]
Silent Boot [Enabled]
Configuration Table [Disabled]
`
Hard Disk Boot Priority [Press Enter]
Quick Powr On Self Test [Enabled]
First Boot Device [Disabled]
Second Boot Device [ZIP]
Third Boot Device [CDROM]
Boot Other Device [Enabled]
Boot Up NumLock Status [On]
Gate A20 Option [Normal]
Security Option [Setup]
# CPU Hyper-Threading [Enabled]
Limit CPUID Max. to 3 [Disabled]
D2D Function [Disabled]
On-Chip Frame Buffer Size [8MB]
KLJI
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Default Settings
Item Help
Menu Level
`