Acer AC511 SERIES Reference Manual Download Page 2

41A604-786-2A 英文

 

2

PRECAUTIONS 

 

z

  Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen 

sink, laundry tub, swimming pool or in a wet basement. 

z

  Do not place the monitor on an unstable cart, stand, or table. If the 

monitor falls, it can injure a person and cause serious damage to the 
appliance. Use only a cart or stand recommended by the manufacturer or 
sold with the monitor. If you mount the monitor on a wall or shelf, use a 
mounting kit approved by the manufacturer and follow the kit 
instructions. 

z

  Slots and openings in the back and bottom of the cabinet are provided for 

ventilation. To ensure reliable operation of the monitor and to protect it 
from overheating, be sure these openings are not blocked or covered. Do 
not place the monitor on a bed, sofa, rug, or similar surface. Do not place 
the monitor near or over a radiator or heat register. Do not place the 
monitor in a bookcase or cabinet unless proper ventilation is provided. 

z

  The monitor should be operated only from the type of power source 

indicated on the label. If you are not sure of the type of power supplied to 
your home, consult your dealer or local power company. 

z

  The monitor is equipped with a three-pronged grounded plug, a plug with 

a third (grounding) pin. This plug will fit only into a grounded power 
outlet as a safety feature. If your outlet does not accommodate the three-
wire plug, have an electrician install the correct outlet, or use an adapter 
to ground the appliance safely. Do not defeat the safety purpose of the 
grounded plug. 

z

  Unplug the unit during a lightning storm or when it will not be used for 

long periods of time. This will protect the monitor from damage due to 
power surges. 

z

  Do not overload power strips and extension cords. Overloading can result 

in fire or electric shock. 

z

  Never push any object into the slot on the monitor cabinet. It could short 

circuit parts causing a fire or electric shock. Never spill liquids on the 
monitor. 

z

  Do not attempt to service the monitor yourself; opening or removing 

covers can expose you to dangerous voltages and other hazards. Please 
refer all servicing to qualified service personnel. 

z

  To ensure satisfactory operation, use the monitor only with UL listed 

computers which have appropriate configured receptacles marked 
between 100 - 240 VAC, Min. 1.5A. 

z

  The wall socket shall be installed near the equipment and shall be easily 

accessible. 

 
 

Summary of Contents for AC511 SERIES














Reviews: