Acer A221HQV Service Manual Download Page 61

Page: 61 / 88

6. Firmware Upgrade Process (continued)

S5. Press button to update the firmware.

see the message of ‘Pass’ shown on the window, it

means ISP upgrading process is completed.

Once you

6.3 How to check firmware version?

S1. Turn off the monitor, press “Power” and “e” button at the

same time for turning on the monitor.

S2. Press “Menu” button again to enter factory mode, and

you will see the firmware version.

Note: Please pay attention: Don’t change any parameter
which is measured by precise machine before shipping out.

S4. Select the right F/W code for the mode you want to

update. Herein we take the model of 1A1D1H and 1A1D

for example, select “Bin” as “File Type” first, then click

［

BigBin

］

to choose “A211H_RH_M001_0428.BIN” in the

folder of “A211H_RH_M001_0428” or

“A221HQ_RH_M001_0428.BIN” in the folder of

“A221HQ_RH_M001_0428”( you can also select hex as

file type).

Power

Go to contents page

ACER A211H/A221HQ

Summary of Contents for A221HQV

























































































Search results

Summary of Contents for A221HQV

Reviews:

Acer A221HQV, Service Manual, Page: 61 / 88

Search results

Summary of Contents for A221HQV

Reviews: