1-14
User’s Guide
1.6.1
Software Error Messages
Software error messages are returned by your operating system or
application. These messages typically occur after you boot the
operating system or when you run your application. If you receive
this type of message, consult your application or operating system
manual for help.
1.6.2
System Error Messages
A system error message indicates a problem with the computer itself.
A message of this type normally appears during the power-on self-
test, before the operating system prompt appears. Table 1-5 lists the
system error messages.
Table 1-5
System Error Messages
Message
Action
CMOS Battery Error
Replace the RTC chip or contact
your dealer.
CMOS Checksum Error
Check the RTC chip and the
necessary jumper. If the battery is
still good, run Setup.
Display Card Mismatch
Run Setup
Diskette Drive Controller Error or
Not Installed
Check and connect the control
cable to the diskette controller.
Diskette Drive Error
Diskette may be defective. If not,
replace the diskette drive.
Diskette Drive A Type Mismatch
Run Setup and select the proper
drive type.
Diskette Drive B Type Mismatch
Run Setup and select the proper
drive type.
Equipment Configuration Error
Modify DRAM configuration to
agree with one of the options in
Tables 1-1, 1-2, and 1-3.
Fixed Disk Controller Error
Run Setup.
