Acer 390 Series, Service Manual

Page: 139 / 204

BIOS Setup Information 3-9
3.5 Power Management Settings
The Power Management Settings screen contains parameter items related to power-saving and
power management.
Power Management Settings
Heuristic Power Management Mode --------- [Enabled]
Display Always On --------------------------------- [Disabled]
System Sleep State -------------------------------- [Hibernation]
System Resume Timer Mode ------------------ [Disabled]
System Resume Date ------------------------------- [--/--/----]
System Resume Time ------------------------------ [--/--/--]
Modem Ring Resume On Indicator ---------- [Enabled]
Battery-low Warning Beep ---------------------- [Enabled]
Sleep Upon Battery-low -------------------------- [Enabled]
↑↑↓↓
=Move Highlight Bar,
→ →← ←
=Change Setting, Esc=Exit
Press
↑↑
and
↓↓
to move the highlight bar; press
→ →
and
← ←
to change the setting of the highlighted
parameter. To exit this screen and return to the main screen, press Esc.
The following table describes the parameters in this screen. Settings in boldface are the default
and suggested parameter settings.
Table 3-5 Power Management Settings Parameters
Parameter Description Setting or Format
Heuristic Power
Management Mode Enables or disables heuristic power management mode. Enabled
Disabled
Display Always On When enabled the computer does not enter display
standby mode.
Disabled
Enabled
System Sleep State Setting this item determines which power management
mode (Hibernation or Standby) the computer enters into
when you press the Sleep hotkey (Fn-F7).
Hibernation
Standby
System Resume Timer
Mode When enabled and the system resume date and time
are valid, the computer resumes (wakes up) at the set
time and date. Disabled
Enabled
System Resume Date Sets the date the computer resumes (wakes up) from if
the system resume timer is enabled. month/day/ year
System Resume Time Sets the time the computer resumes (wakes up) from if
the system resume timer is enabled. hour/minute/second