Acer 3200 Series Service Manual Download | Manualshive

Page: 95 / 113

background image

Chapter 6

87

This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of Ferrari 3200 series
products. Refer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise
Authorization).

Please note that WHEN ORDERING FRU PARTS, you should check the most up-to-date information available
on your regional web or channel. For whatever reasons a part number change is made, it will not be noted on
the printed Service Guide. For ACER AUTHORIZED SERVICE PROVIDERS, your Acer office may have a
DIFFERENT part number code from those given in the FRU list of this printed Service Guide. You MUST use
the local FRU list provided by your regional Acer office to order FRU parts for repair and service of customer
machines.

NOTE:

To scrap or to return the defective parts, you should follow the local government ordinance or

regulations on how to dispose it properly, or follow the rules set by your regional Acer office on how to
return it.

NOTE:

Exploded diagram is not ready as service CD released. We will update the service guide to CSD

website, please download the exploded diagram from the website if you need the files

FRU (Field Replaceable Unit) List

Chapter 6

«
...
93
94
95
96
97
...
»

Summary of Contents for 3200 Series


















































































































Reviews:

No comments

Related manuals for 3200 Series

POWERMATE ES 5250 - S

Brand: NEC Pages: 18

POWERMATE VT 300 RELEASE NOTES

Brand: NEC Pages: 16

POWERMATE CT 815 - RELEASE NOTES

Brand: NEC Pages: 155

Brand: NEC Pages: 6

POWERMATE ES Series

Brand: NEC Pages: 132

POWERMATE ES Series

Brand: NEC Pages: 8

Brand: NEC Pages: 167

Brand: NEC Pages: 1

Brand: IBM Pages: 164

6219 - IntelliStation M - Pro

Brand: IBM Pages: 154

Brand: IBM Pages: 72

Brand: Gateway Pages: 72

Brand: Vivo Pages: 2

Brand: Vivo Pages: 3

Brand: Acer Pages: 48

Brand: Acer Pages: 68

5535-5050 - Aspire

Brand: Acer Pages: 11

Brand: Acer Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands