Acer 193199140210 User Manual Download Page 30

Page: 30 / 38

2. FreeSync: Select On or Off. FreeSync is available for AMD supported

graphic cards only.

Freesync Premium: Select On or Off. Freesync Premium is available for

AMD supported graphic cards only.

Freesync Premium Pro: Select On or Off. Freesync Premium pro is

available for AMD supported graphic cards only.

Adaptive-Sync: Select On or Off. Adaptive-Sync is available for AMD

supported graphic cards only.

Note:

Freesync/Freesync Premium/Freesync Premium Pro/Adaptive-

Sync depend on detail model.

3. Refresh Rate Num: Display the panel’s current refresh rate on the

screen.

4. VRB: When VRB is Extreme or Normal, VRB provides a sharper and

clearer dynamic picture; the default is Off.

• VRB does not support PIP/PBP Mode and HDR Mode. (Selective

models)

• When VRB is Extreme or Normal, Freesync/Freesync Premium/

Freesync Premium Pro/Adaptive-Sync is automatically turned off.

• VRB will affect the brightness of the following: Logo, Aim Point,

Message and Input Icon.

• VRB feature is dependent on the monitor’s maximun refresh rate.

And it is available when the refresh rate is greater or equal to

75Hz.

5. Ultra-Low Latency: Select On to speed up the processing time of the

display switching process.

Note:

1. If Freesync/Freesync Premium/Freesync Premium Pro/Adaptive-

Sync is “ON”, then the Ultra-Low Latency is automatically turned

On and grayed out.

2. Ultra-Low Latency is not supported at resolutions below 800x600.

6. Aim Point: Show an Aim point on the screen for shooting games.

Note:

Aim Point is not supported in PBP mode.

Summary of Contents for 193199140210







































Search results

Summary of Contents for 193199140210

Reviews:

Related manuals for 193199140210

Brands by name

Popular brands

Acer 193199140210, User Manual

Search results

Summary of Contents for 193199140210

Reviews:

Related manuals for 193199140210

Brands by name

Popular brands