the user must brake the wheelchair. The Yomper
drive wheel does not have a brake. When the
motor stops, it goes into freewheel mode.
You can change the speed while driving or while at a
standstill.
Accelerate :
Press the arrow
furthest
from you to
increase
speed.
Slow down :
Tap the arrow
closest
to you to
decrease
speed.
The LEDs show you the speed level (5 Maximum).
10
The LED of the EasyGo box flashes. The Power button on
the Yomper no longer flashes, meaning you are ready to use
the Yomper.
Controls ands modes
Start :
Press the main button on the control box twice, the
Yomper will instantly start at speed 1 (the LED will no longer
flash).
Stop :
Press the main button once, the Yomper motor stops.
The LED flashes green.
Starting at speed 2 or 3 is also possible to facilitate hill
starting of the Yomper.
(later versions than 2.7.0).
Summary of Contents for YOMPER+
Page 1: ...User Manual ACC 001 B...
