ACEGER Cruiser Bike, Owner'S Manual

Page: 8 / 28

4
ON ROAD SAFETY
1. IN THE INTEREST OF SAFER CYCLING, MAKE SURE YOU READ
AND UNDERSTAND YOUR OWNER’S MANUAL. NOTE AND
PERFORM PRE RIDE SAFETY CHECKS.
2. NOTICE: Some state and local laws may require that your
bicycle be equipped with a warning device such as a horn or bell
and a light if the bicycle is to be ridden after dark.
3. ALWAYS WEAR SHOES when riding a bicycle and AVOID
LOOSE FITTING CLOTHES.
4. CHECK YOUR BRAKES FREQUENTLY. THE ABILITY TO STOP
YOUR BICYCLE IS CRITICAL. Roads are slippery when wet so avoid
sharp turns and allow more distance stopping.The V brake may
become less efficient when wet. Leaves, loose gravel, and other
debris can also effect stopping.
5. ALWAYS RIDE IN THE SAME DIRECTION AS TRAFFIC. Never
ride against traffic.
6. STOP AND LOOK BEFORE YOU LEAVE AN ALLEY,
DRIVEWAY, OR PARKING LOT. Stop, look to the right, to the left,
and to the right again for traffic. Ride only when it is clear.
7. KEEP TO THE RIGHT. Follow the traffic flow in a straight line and
stay close to the curb. Watch for cars moving in and out of traffic.
8. OBEY ALL TRAFFIC LAWS REGULATIONS. Most traffic
regulations apply to bike riders as well as automobile operators.
9. ALWAYS RIDE ALONE. NEVER CARRY OTHER RIDERS. This is
dangerous and makes the bike harder to control.
10. ALWAYS BE ALERT. Be ALERT - pedestrians have the right of
way. Be ALERT - when riding near parked cars - ride far enough
away from the cars so that you won’t get hit if someone opens the
car door.
OFF ROAD SAFETY
We recommend that children not ride on rough terrain unless
they are accompanied by an adult. Whether you call it Aggro,
Hucking, Freeride, North Shore, Downhill, Jumping, Stunt Riding,
Racing or something else: it is
NOT
off road riding, it is NOT
recommended and if you engage in this sort of extreme, aggressive
riding you
will get hurt, and you voluntarily assume a greatly
increased risk of injury or death. Aceger bicycles are not designed
for these types of extreme riding.
TOOLS REQUIRED
●Phillips head screw driver and M5,M6 Allen wrench
●8mm,10mm,15mm,12mm,13mm and 14mm Open-end wrench