5. Calibration
7. Contrast/Backlight
4. HotSync®
6. Resetting
All Content Copyright © 2004 Aceeca Limited - All Rights Reserved. Aceeca, Meazura, MEZ1000 and RDA are all trademarks of Aceeca Limited. Palm OS, HotSync,
Graffiti and the Palm Powered logo are registered trademarks and Palm Powered is a trademark of Palm Trademark Holding Company, LLC. and are used by
Aceeca Limited under express license with PalmSource, Inc. All other trademarks referred to in this document are the properties of their respective owners.
QSG-MEZ1000-090204
• Ensure Palm Desktop software is installed on your computer (see step
1 ‘Setup’)
• Connect the communications cable to your Meazura™ and your
computer as per instructions over page in step 2 (‘Connect’).
• On your Meazura™ RDA, tap on the HotSync icon (as pictured left).
• Tap the large icon in the center of the screen to start the HotSync
operation.
• Follow all instructions on your PC and your Meazura™.
This procedure calibrates the touch sensitive screen on your Meazura™
• Tap on the ‘Prefs’ icon
• From the dropdown list, choose “Digitizer”
• Follow on-screen instructions
Other preferences for setting up your handheld can be found in the drop
down list, such as “Date and Time”. To adjust these extra settings,
simply tap the setting choice in dropdown list and follow the on-screen
instructions.
To turn on the backlight, press the Backlight button (pictured right)
Press and release Power and Backlight button together
Soft Reset
(no loss of data)
1. Press and hold the Power and Backlight button together then release the Backlight button only
2. Release the Power button when the Palm Powered logo appears
3. Follow on-screen instructions
1.
2.
=
Hard Reset
(restores Meazura™ to factory settings)
Backlight
To adjust the contrast of the screen, hold the backlight button for 1.5 seconds
to bring up the contrast slider on-screen (as pictured left).
• Use your stylus to drag the slider bar until you reach your desired contrast,
then click ‘Done’.
Contrast