5
Use the PenPaper with Windows
The HID Tablet mode of PenPaper
To use the PenPaper with Windows, the slide switch on
the right side of the digital pad must be slid to the HID
Tablet mode of PenPaper.
Pair your PenPaper with Windows
Before you can use the PenPaper with Windows, the PenPaper has to be paired once
with Windows.
1. Turn off the digital pad.
2. Press and hold the Power button on the digital pad (about 3 seconds) until the right
blue LED rapidly flashes.
3. In your Windows, add the PenPaper HID as a Bluetooth device.
4. When successfully paired, the PenPaper will be connected to Windows and the
right blue LED slowly flashes.
Bluetooth HID Tablet Device in Windows
When connecting, the PenPaper is a Bluetooth HID
tablet device in Windows and for all Windows
applications. You can use the digital pen on the writing
area of the horizontal pad to move the mouse pointer on
the screen.
The writing area of the horizontal pad corresponds
directly to the whole screen. For example, if you move
the pen to the lower-left corner of the horizontal writing area, the mouse pointer will
move to the lower-left corner of the screen.
The button actions of the pressure sensitive digital pen
The actions of the pen pressure sensing tip, upper and lower buttons, of the digital pen
is defined by Windows. When connecting, you also can find and refer to Pen and Touch
dialog in the Control Panel.
For example, the actions are shown below:
Writing area of the
horizontal pad
Primary Barrel Button:
Hold the button down
then tap the digital pad
(as Mouse Right-click).
Eraser Button:
Hold the button down then use
the pen tip to erase on digital pad.
Pressure Sensing Tip:
Single-tap (as Mouse Single-click)
Double-tap (as Mouse Double-click)
Press and hold (as Mouse Right-click)
Slide
Switch
Writing
Mode
HID Tablet
Mode
