www.acebikes.com
www.acebikes.com
www.acebikes.com
www.acebikes.com
Safety instructions
Check your tyre pressure first. low
tyre pressure affects the function
negatively.
Do not use the CapStrap without
extra tie downs on your motorcycle.
Maximum force allowed on the
CapStrap is 500Kg.
Do not use the CapStrap for lifting.
Make sure the strap is always
facing downwards when securing
the motorcycle.
Step 1
Remove any end-caps on the
rear axle and make sure the rear
axle is clean inside.
Please understand, that AceBikes cannot be
held responsible for any consequential loss or
damage due to an improper assembly or use
of the product.
Step 2
Slide the straps of both caps
through the axle.
Step 3
Pull the first strap through the
bottom half of the opposite cap.
Step 4
Repeat the process on the other
side of the rear wheel.
Step 5
Hand tighten both straps so the
caps slide in the axle.
Step 6
Connect the ratchets with the
straps and tighten both ends
alternately.