Ace ACE.BOIL, Instructions Manual

Page: 11 / 13

10
ACE.BOIL water system
Dispensing water types Boiling water, cold/hot tap water.
Boiling water tank capacity 4.4 Litres
Heating-up time 15 minutes (from 20
o
C to 100
o
C)
Min./Max. mains pressure 2/5 bar (200/500 kPa)
System max. safety pressure
8 bar (800 kPa)
Max. hot water temperature
100
o
C
Operation Operation via mechanical control knob, handle
Power supply
230VAC/50Hz
Max. power consumption
1550 W
Standby power consumption
0.35 W
Safety features Maximum temperature fuse, Safety valve(with a cut-off, relief valve ,a built-in non-return valve)
Tank Dimensions 219mm x 366 x 279 (L x H x W)
Empty tank weight 4KG
Full tank weight 8.4KG
Flow rate 2.5 L/min
Max. water hardness 10° dH
Read this document before installing and operating this product. Users are required to be familiar with all the information and applicable
standards prior to installing and using this product. This manual should be saved for future reference and use.
• Ambient conditions requirements: Relative humidity: 25%~90%; Storage temperature: -20
o
C to 60
o
C(-4
o
F to 140
o
F); Operation
temperature: 4
o
C~50
o
C(39.2
o
F to 122
o
F).
• Do not install the unit near heat sources or an open fire. Unit environment should be well-ventilated.
• Inform people who are unfamiliar with the ACE.BOIL water system about safe use, incorrect use may result in injury.
• Consult a service technician if the ACE.BOIL water system does not operate normally when you have followed the instructions in this
manual.
• Filter is optional, a filter can be fitted in order to lower the water hardness, filter the content of the water for hygiene reason and
extending the product
,
s lifetime. Filter can be ordered online at the website http://www.ace-watersystems.com
.
• Filter with water softener is mandatory to use when water hardness exceeds 10
o
dH.
• Do not attempt to repair this product yourself. Always get an ACE qualified service technician to carry out adjustments or repairs.
• Whenever a power cord is used, it should be certified by local and national standards and used under guidance of an authorized
technician.
• The ACE.BOIL water system may only be installed according to the instructions in this manual. Incorrect installation of the unit
may cause damage to property. Do not use any extension hoses other than those supplied with the unit or supplied by ACE Water
Systems.
• The power supply cord and On-Off Power button are used to connect and disconnect the unit from power. Ensure that the socket
outlet and knob are accessible after installation.
• Overloaded AC outlets, extension cords, and broken plugs are extremely dangerous. They may result in electrical shock or fire
hazard. Call an authorized service technician for any replacements.
• Hands must be dry when plugging the power cord in or out of the AC outlet to prevent electrical shock. Do not damage the power
cord by disassembling, bending, pulling or exposing it to heat as this may cause a fire or electric shock.
• Make sure to completely insert the power plug into an AC outlet. Insecure connections can cause fire.
• Ensure that the power source is grounded correctly. Do not use extension cables and adapters between boiler and power source.
• Unplug the unit whenever it is not in use for an extended period of time.
Product safety precautions
Technical Specifications
Caution!
After assembling the water system and before turning on the power, please hold the boiling water knob open till water
flows out from faucet outlet, then connect power, turn the Power button to“On”position to start the water heating.
Warning:
Use caution when dealing with boiling water. Children should not touch the device. Cleaning and user
maintenance must not be carried out by children without supervision.
Note: In area where the water hardness exceeds 10° dH (German hardness), it is required to use an ACE filter with water softener.