Ace ACE-3205, Installation And Operation Manual

Page: 251 / 418

Installation and Operation Manual Chapter 6 Monitoring and Diagnostics
ACE-3105, ACE-3205 Ver. 5.2 Monitoring Performance 6-13
Table 6-10. Port Monitoring Options
Parameter Description Possible values
Ethernet Ethernet monitoring menu Refer to
Figure 6-14
below
E1/T1 E1/T1 monitoring menu Refer to Figure 6-16
ADSL2+ ADSL2+ monitoring menu Refer to Figure 6-17
SHDSL SHDSL monitoring menu Refer to
Figure 6-19
Viewing the Ethernet Port Information
The Ethernet port information is presented in two categories:
•
Port status – the port’s MAC address, duplex mode, bit rate and connection
status
• Port statistics – statistics regarding the port's performance.
³
To view the Ethernet port status:
1. From the Port menu (see
Figure 6-13
), select Ethernet.
The Ethernet menu appears.
2. From the Ethernet menu, select Status.
The port status details are displayed.
ACE-3205 – RAD Data Communications
Monitoring> Physical Layer> Port> Ethernet> Status
MAC address ... (00-20-D2-20-51-CD)
Mode > (Full duplex)
Rate > (100Mbps)
Status > (Connected)
1. Port number ... (1)
>
Please select item <1 to 1>
ESC-Previous menu; !-Main menu; &-Exit
Figure 6-14. Ethernet Port Status Information
Table 6-11. Ethernet Port Status Parameters
Parameter Description Possible Values
MAC address MAC address of the Ethernet port XX-XX-XX-XX-XX-XX
(hexadecimal)
Mode The port mode is either the default mode
set by the user, or the mode selected based
on the autonegotiation results. Half duplex
Full duplex