Appendix
B Boot Manager
Installation and Operation Manual
B-2
Booting ACE-3105, ACE-3205
ACE-3105, ACE-3205 Ver. 5.2
If there is no backup file, you must download a file via the XMODEM
protocol or via TFTP. The received file is saved as the operating file in the
file system.
2.
Files in the file system are compressed and automatically decompressed into
the RAM before execution begins.
3.
After decompression, the software starts to execute and the user can begin
working.
Using the Boot Options
When ACE-3105, ACE-3205 is turned on, the first screen that appears is the main
boot screen.
BOOT WP 787-Rev-B1
RAD DATA COMMUNICATIONS
Boot software version 2.12 JUN 3 2006, 8:41:00
Press Ctrl-A to enter debug screen
Figure
B-1. Main Boot Screen
If during the boot Ctrl-A is not pressed, the boot proceeds as described in
on page
.
If during the boot Ctrl-A is pressed, the boot options screen appears.
BOOT WP 787-Rev-B1 – FILE MENU
1. File Download
2. File Utility
Select:
Figure
B-2. Boot Options Screen
Performing File Download
File downloading allows you to download a new software application file (a newer
or a previous version) into the unit using the XMODEM protocol. In order to use
this functionality, two conditions must apply:
•
No application file exists
•
File Download was selected after Ctrl-A was pressed.
³
To download an application file:
•
Type 1 in the boot options screen (see
).
The download options appear.
