background image

Additional Driving Gear

In addition to a helmet and eye protection, we also recommend:

Sturdy off-road motorcycle boots to help protect your feet, ankles, and lower legs.

Off-road motorcycle gloves to help protect your hands.

Driving pants with knee and hip pads, a driving jersey with padded elbows, and a chest/

shoulder protector.

Driver Training

Developing your driving skills is an ongoing process. Even if you have driven other karts,

before driving take time to become familiar with how this kart works and handles. Practice driving

the kart in a safe area to build your skills. Do not drive in rough terrain until you get accustomed

Age Recommendation

It is strongly recommended that no one under the age of 16 be permitted to operate this go-kart

without adult supervision.

No Alcohol or Drugs

Alcohol, drugs

 and karts don't mix. Even a small amount of alcohol can impair your ability

while operating a kart. Consult your doctor to be sure it is safe to operate a vehicle after

taking medication.

WARNING

Operating this kart without your seat belt could cause you to be thrown

from the kart, causing serious injury or death.

WARNING

A child driving a kart that is not recommended for his/her age could lose control

of the kart resulting in severe injury or death.

A child under 16 should have adult supervision when operating the kart.

WARNING

Operating this kart after consuming alcohol or drugs can seriously

affect your judgment, cause you to react more slowly, affect your balance

and perception, and could result in serious injury or death.

Never consume alcohol or drugs before or while operating this kart.

ARE YOU READY TO DRIVE?

to the kart’s controls, and feel comfortable with its size and weight

9

Summary of Contents for Maxxam 150 2R















































































Reviews: