5. Please refer to the Software Operation.
Software Operation
Before executing the software, please make sure the DIP switch at the bottom:
1. The power supply is well connected.
2. DIP switches are at the right position as shown below.
1. Getting started
1. Firstly, make sure of the correct setup, and click on the button “Auto Scan ComPort” [1]. If the
installation is accurate, the following Pop-up message window will show up, indicating the serial
port [9] is automatically detected and successfully connected.
[8]
[9]
[10]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
2. If the error message as shown below appears, it means inappropriate setup occurs. Please do
the check at the power supply and serial port connection.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
Page
6
of
8
