Hardware Installation
1. Connect your HDMI sources to the HDMI input connectors.
2. Connect your HDMI enabled monitors into the device’s HDMI loop output port.
3. Connect your stereo S/PDIF AV receiver into the device’s RCA output port.
4. Connect your 7.1ch or 5.1ch speakers into the device’s RCA output ports.
5. Power up the EX-G040.
EDID Learning
1. Power up the EX-G040. Connect display to
HDMI Output
.
2. To learn EDID for
HDMI Input #1
source, pull up-and-down the
DIP switch 1 to ON
to complete
the EDID learning process. You DON’T NEED to pull up the DIP switch again unless you want to
learn another EDID by pulling DIP switch 1 up and down once more.
3.
To learn EDID for
HDMI Input #2
source, pull up-and-down the
DIP switch 2 to ON
to complete
the EDID learning process. You DON’T NEED to pull up the DIP switch again unless you want to
learn another EDID by pulling DIP switch 2 up and down once more.
Notice
1. Depends upon the content of DVD, analog stereo audio output can support up to 7.1-channel
audio.
2. S/PDIF audio output supports main 2-channel audio output only.
3. The main purpose of lower the HDMI 1.3 resolution to HDMI 1.2 is to increase the transmission
distance without creating noticeable video quality distortion.
ACE PLUS CORP.
Page 6 of 8
/ 2011
Headquarters :
9F.-2, No.190, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan
Tel : +886-2-2912-4201
Fax : +886-2-2912-3164
E-Mail: [email protected]
Technical Support: [email protected]
http://www.ace-plus.com
http://www.ace-plus.tw
FEB 11
Version 1.0
