Ace Plus EX-G006 User Manual Download Page 2

Introduction

 

 

 

 

The 

EX-G019 HDMI 1.3 over CAT5 Wall Plate Extender with IR Control Path

 

wall plate 

edition

 boosts up your video/audio transmission distance up to 60m [200ft] in HDTV 720p/1080i 

format. With two low cost CAT-5/5e/6 LAN cables, users can readily extend HDTV sources from DVD 

players, Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to distant 

display monitors including HDMI enabled TV sets, LCD PC monitors, or projectors. This cost effective 

flexibility makes HDCP compliant DVD players or PS3 transmit high quality video and audio with a 

greater distance at the minimal cost for wall plate application, when integrating several components 

apart. In addition, with the embedded infrared [IR] receiving and emitting units to facilitate the control 

path, users can enjoy high quality audio/video and control the HDMI sources from the remote site 

instantly. 

The EX-G019 includes two units: EX-G019-TX as the transmitting unit and EX-G019-RX as the 

receiving unit. The transmitting unit is used to transfer the HDMI/DVI and IR signals input and carry the 

signals through two RJ-45 connectors over two low cost CAT-5/5e/6 LAN cables. The receiving unit is 

responsible for equalizing transferred TMDS multimedia data and re-sending IR signals. The 

transmission distance between the sending and receiving units can be up to 60m [200ft] under HD 

resolution [720p or 1080i] or 40m [130ft] under Full HD resolution [1080p]. With 8-level equalization 

control on the receiving unit, users can adjust the equalization scale to the received TMDS signals, 

and therefore optimize the transmission distance between source and destination. 

 

Depending upon the HDMI source and receiver, the equalization level may need to adjust 
even though the installed cables remain intact. 

  

Features 

z

 HDMI 1.3c compliant 

z

  Extends the transmission distance up to 60m [200ft] from the sources under 1080i or 720p 

z

  Extends the transmission distance up to 40m [130ft] from the sources under 1080p 

z

  Provides independent DDC channel, fully HDCP compliant 

z

  Minimizes the cable skew by adjustable 8-level equalization control 

z

  Embedded IR control path 

z

  Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission 

z

 Allows cascading 

z

  Perfectly integrated with other HDMI over CAT5 series products 

 

The length depends on the characteristics and quality of the cables.

 

Higher 

resolutions and longer transmission distances require low skew cables 
(<25ns/100m) for best performance. Unshielded CAT6 with metal RJ-45 connectors 
is recommended.

 

ACE PLUS CORP.

Page 2 of 10

FEB   / 2011

Version 1.0

Headquarters :

9F.-2, No.190, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan

Tel  : +886-2-2912-4201

Fax : +886-2-2912-3164

E-Mail: [email protected]

Technical Support: [email protected]

http://www.ace-plus.com

http://www.ace-plus.tw

22

Summary of Contents for EX-G006











Reviews: