AXS
–
Fixed Step Manual
AXS
–
FL Fixed Step Manual Vers 2.0
3
4 Mounting / Installation
The installation must only be done by a company that is well known with bodybuilding or modifying
vehicles, which has the trained technical staff to do this job.
4.1 Mechanical Installation
For mounting the step you do not need to make any large vehicle adaptations. The step is placed under
the floor in the middle of the front, middle or rear door.
Chassis modifications are not needed.
Warning: Changing the vehicle chassis affects the strength of the vehicle. This kind of changes
is only allowed after approval of the vehicle builder / constructor. You need to consult the vehicle
builder for these kinds of changes. Acdeos cannot be made responsible or held accountable for
any vehicle / chassis changes.
Exact measurements of the product should be taken from the official installation drawings. Ask Acdeos
for the last revision and official installation drawing. Figures, drawings in this manual are only for
indication.
Some pictures in this manual do show older version platform
Installation:
Not VW T5 / T6
Create a safe working condition.
Lift the vehicle to the appropriate working height.
Place the step where you want it.
Place the carrying arms symmetrically like this.
Place the bracket above the carrying arms.
And mark up for holes.
