Plaza S7x Instructions: He44 (0) 845 862 6400.
3
INS310 Rev.1
1. Loosen bracket with allan key provided,
do not remove screws.
2.
Remove the bracket from housing using key hole slots.
5.
Remove back plate using allen keys.
3.
Fix bracket to mounting surface, single fix in centre of bracket.
Secondary fixing available if necessary.
4.
Refit bracket and tighten screws using allan key.
6. Wiring:
Single feed
-
Bring the wires through the gland
and connect to terminal. a) Size of cable 0.5mmcross section 3-6mm
outer.
7.
For loop in loop out remove gland bung to access second gland
diametre. Remove link wire when wiring in series, do not remove
end of run.
8.
Refit back cover, torque rating 1 newton meter.
+ -
+ -
+ -
IN
OUT
IN
OUT
PLAZA S7x STEP-BY-STEP INSTALLATION
Check all cable entry points and tighten to the recommended torque rating of 6.25N/m
Check all cable entry points and tighten to the recommended torque rating of
6.25N/m