Cell Installation and Removal
There are no tools required by the end user for service of the
instrument. The electrochemical cells are shipped seperate of the unit
and should be installed on receipt.
To install the cell, remove the bottom
cover of the instrument. This is done by pulling each of the ‘plunger feet’
on the
bottom of the instrument. Once all of the plungers have been pulled
out, the bottom cover is simply removed from the instrument.
The cell is keyed to ensure proper alignment into the instrument. When
installed, the circuit board of the cell should be flat with the bottom of the
instrument. Push up on the clear window at the back of the instrument to
eject the cell.
Page 3
