Operations
If the mobile isn’t able to pair the headset within 90 seconds after entering
Discovery Mode, the process will terminate automatically. User must
repeat the entire pairing process again by turning the headset OFF, and
then re-entering the Discovery Mode.
Multipoint Pairing
(Connecting your headset to 2 mobile phones)
BT703 has the ability to pair with more than one device at the same time.
1. Follow the instruction on the previous page on pairing with the first
mobile phone.
2. After the successful pairing with the first mobile phone.
3. Turn the headset off.
4. Repeat the same pairing procedure with a second mobile phone.
5. Go back to the first mobile phone, and select BTK703 to activate the
connection.
Now, both mobile phones are connected to the same Bluetooth headset.
When a call comes in from any of the two mobile phones, click the Answer
Button on the headset to connect the call.
While you are on the call with one phone, the other phone’s Bluetooth
Headset connection will be disconnected temporarily. So if another call
comes in at the same time, you can only connect to the first call.
Operations
E
Wearing the Headset
D
Pairing the Headset
First, connect the headset to the Earhook as illustrated above.
Depending on which ear you prefer to wear the headset, you can flip
the Earhook over before you connect it to the headset.
Wear the headset by inserting the Earbud into your ear, and extend the
Earhook to the back of your ear for a firm fit. If the size or the curve of the
Earhook is not a perfect fit, gently bend the Earhook to adjust. Do not
use extreme force as this can break the Earhook.
Earhook
Earbud
F
Making a Call
If your BT703 is properly connected to your mobile phone, make a
phone call simply by dialing the number using your phone and click
send or call. The BT703 will automatically connect the audio channel.
User should be able to ear the dial-tone of the phone once the call is
being made.