[ inspiring people, inspiring change ]
INSTALLING YOUR H30 HEADSET
putting everything together!
Installation
Usage
5
6
1
2
3
4
A
B
C
B.1 Installing the Headset Using C100 Telephone Adaptor
Connect H30 with C100 as illustrated above. First (1) connect the QD
plugs together, then (2) connect the end of the QD to the front jack of
the C100. Unplug the handset from the telephone and (3) insert the
C100 cable’s plug into the telephone’s handset jack. Lastly, (4) connect
the handset to the rear jack of the C100.
Open up the lid of C100, and lift up the handset. Try every positions of
the two switches (up to 12 combinations) until you can listen and talk to
the other person clearly. C100 also comes with a mute button and a
Headset/Handset switch so users can switch back to handset if desired.
TALK
MUTE
B.2 Installing the Headset Using A30 Telephone Amplifier
Note that this section will only briefly illustrate the installation of H30
with the A30 amplifier. As you will find the user manual that comes with
the telephone amplifier will have full details on installation and various
functions.
First connect the telephone with the A30 by removing the handset from
it’s jack. (1) Connect the handset cable’s plug into the handset jack at the
bottom of the amplifier as illustrated. (2) Use the supplied modular cable
to connect the amplifier with the telephone. Continue to the next page
for connecting the headset.