part 2. begin to operate.
15
14
II.2
Series 1100 in action! Comfort & Convenience.
II.1
telephone communication.
Series 1100 in action! Comfort & Convenience.
part 2. begin to operate.
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
Check if the batteries are too low, replace if required.
Check if the Polarities of batteries are placed correctly.
Make sure the On/Off switched to ON.
Check if the Configuration Switch is properly selected.
Volume Control and Mute button are adjusted properly.
Headset/Handset and Telephone/Computer switches are
properly selected.
Check if the telephone patch cable is properly connected.
Check if the Telephone/Computer switch is selected at
telephone.
Make sure the Configuration Switch is properly selected.
Try other positions until your hear okay.
Make sure the Mute button is not pressed down.
Use the screwdriver to check if Mic volume is set too low.
Try to select the proper settings with the configuration
switch.
The rotary transmit Mic volume control is set too high.
Reduce this volume or refer to section I.3.3.
Take a look at the connection on your computer where the
cables connect with the 1100 amplifier. There should be 3
jacks (line-in, line-out and speaker).
Make sure the line-out cable from the amplifier is
connected to the line-in jack of the computer.
Make sure that the line-in cable from the amplifier is
connected to the line-out jack of the computer and
NOT
the speaker jack.
PC LINE OUT
Mute
Accutone
Series 1100
Telephony Multimedia Amplifier
II.1.2 Using Headset with Computer
Switch to Computer position through the Telephone/Computer
Application Switch. Select Headset position from the Headset/Handset
Application Switch for using headset. When a phone call comes in or you
want to make a call but during your computer work, simply switch to
Telephone position and lift the handset from the cradle or press the
Speaker-phone button. By selecting Computer position and place the
handset back to its cradle or turn off the Speaker-Phone button, you can
return to your existing computer work.
troubleshooting.
There is no response
from the unit.
I cannot hear any dial
tone or my caller
speaking to me on the
other side.
My Caller cannot
hear me at all or
cannot hear me very
well.
I hear my voice too
loud and there is a
squealing sound.
When using with my
computer, the sound
is too loud even
though the volume is
set at minimum.
II.2. Troubleshooting
PC LINE IN
problem
items to check
