17
16
C.1 Accessories.
C.2 Specifications.
Part C. Accessories & Specifications
accessories & specifications.
C.1
Any additional information I should know?
accessories & specifications.
part c. accessories & specifications.
C.1 Accessories
The A10 Alpha Telephone & Multimedia Amplifier Kit should include:
1. One set of A10 Alpha Amplifier Unit.
2. Computer Patch Cable (with 3.5mm stereo plugs).
3. Telephone Patch Cable with RJ-11 Modular Plugs.
4. Screwdriver Pin.
C.2 Specifications
Standard Operating Voltage
3V DC
Operating Current (Max)
9 mA
Standby Current
200 mA
Standby Mode Activation
2~3 min. without signal
Amplifier Gain - Speaker
13 dB (Max)
- Microphone
30 dB (Max)
Battery
UM-3 x 2 (size "AA")
Adapter DC Input
9V DC500mA
(Adapter not included)
FCC Registration Information to the end user
Modifications not authorized by the manufacturer may void users authority to operate this device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by one or more of the following measures:
- Reorient or relocate between the equipment and receiver
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
- Consult the dealer or an experienced radio/TV technician for help.
Trademark and Ownership
Accutone and the logo design combined are trademarks or registered trademarks of Accutone
Technologies Limited.
