Accusplit Exclusive AX602FY, Operating Instructions

Page: 2 / 4

4-5
There are four buttons as
indicated in the illustration.
TIME/CALENDAR
display
STOPWATCH
display
4
STROKE/FREQUENCY MEASURING MODE
STROKE/FREQUENCY
MEASURING display
A
C
B
D
5
TIME/CALENDAR SETTING
1. Press “D” to show the time/calendar display. The time/calendar display
mark will appear.
2. S1 – Press and hold “B” for 2 seconds until seconds display begins fl ashing.
TIME/CALENDAR display mark
A
C
B
D
Year
Month and date
Seconds
Minutes
Hour
ACCUSPLIT products use a common setting procedure known as S1-S2-S3-S4.
S1 (2 sec) - Enter set function OR
S1 (4 sec) - Enter set function &
clear the current settings
S2 – Select fi eld to be set
(selected fi eld will fl ash)
S3 – Set fi eld to desired settings
S4 – Exit setting function
6-7
6 7
STOPWATCH
Press “D” in the TIME/CALENDAR display to show the STOPWATCH display.
The STOPWATCH display mark will appear.
The STOPWATCH can measure up to 10 hours in hours, minutes, seconds and
1/100 seconds.
• Before using the stopwatch be sure to reset the digits to “0:00:00.00”.
When the stopwatch is stopped, press ”B” to reset.
When the stopwatch is counting, press “A” to stop the measurement
and then press “B”.
A
C
B
D STOPWATCH display mark
Split time
Lap time
Total time (accumulated
elapsed time)
Split/lap number
3. S2 – Press “B” repeatedly to select the digits (fl ashing) to be adjusted.
With each press of “B,” the digits to be adjusted change over in the
following order.
4. S3 – Press “A” to set the fl ashing digits or reset the seconds to “00”.
• The digits move quickly if “A” is kept pressed.
• When the seconds digits count any number from ”30” to “59” and “A” is
pressed, one minute is added and the second digits are reset to “00”.
5. S4 – After all the adjustments are completed, press “A” repeatedly until watch
exits set mode and returns to the TIME/CALENDAR display.
Notes:
1. Hour digits are displayed in the 24-hour indication.
2. Year digits can be set from 1988 to 2027. The calendar adjusts automatically for
odd and even months including February of leap years.
seconds minutes hour year month date
Note: The watch exits set mode automatically after setting date.