Accusound AMA-1, Handbook

Page: 4 / 8

Output Clip:
The Output Clip LED indicates when
too much signal is being fed through
the amplifier. If only short flashes of
Red are visible then the level is near
maximum if the LED becomes
constantly Red then there will be
distortion form the speaker and the
level is too high. The Master level
control should be turned anti-
clockwise to reduce the output level.
Reverberation Parameters:
Reverberation Description Parameter
Spring Reverb Reverb Delay Time
Room Reverb Reverb Delay Time
Slapback Reverb Reverb Delay Time
Hall Reverb Reverb Delay Time
Chorus Reverb Reverb Delay Time
Chorus Chorus Depth
Delay Delay Time
Delay Reverb Delay Time
Octave Octave up/down
Rotary Speaker Rotation Speed
Reverb Tremolo Tremolo Rate
Rotary Speaker Rotation Speed
Flanger Flanger Rate
Phaser Phaser Rate
Tremolo Tremolo Rate
LFO Wah Wah Rate
4