2
• Find a clean surface to work on.
• Place frame pieces face down on the clean work surface
(so the extrusions are facing up).
• The frame pieces are labeled 1-8. Starting with No. 1,
follow the numbers clockwise and connect frame pieces
together. Hand tighten the screws.
• Remove viewing surface from protective pouch and
spread out over the frame so that the vinyl strip is facing
down.
• Attach the corners of the viewing surface to the corners
of the frame using the velcro straps.
• Finish attaching viewing surface to frame by inserting
the vinyl strips along all four sides into the fabric retainer
extrusions on the frame.
Velcro
Strap
Fabric
Vinyl
Strip
1
2
3
4
5
6
7
8
LABELING OF SCREEN FRAME PIECES
PORTABLE MOUNTING
USING OPTIONAL LEG KIT
• Extend the center support to the correct height and
place it in the center of the screen frame. This will
provide additional tension to the center of the frame
and prevent sagging.
• Mount the legs to the back of the screen frame using
pre-mounted attachment brackets.
• Place plastic octagonal feet on the floor, and insert
aluminum legs into plastic octagonal feet.
B
ASSEMBLY
Velcro
Strap
