Microplate Washer User Manual
Chapter 5 Start Up and Software
─
8
─
Chapter 5 Start Up and Software
Start Up Self-Test
When the power is first turned on, the system will perform a quick self-test.
Do not turn off the power, or insert or remove a flash drive during the
self-test.
Do not touch the wash head, wash head rack or plate holder when running.
An alert sound and warning will be displayed if the Waste Bottle W is full or
if A, B or R are empty, or any of the sensors are not properly connected.
In the event of this type of start-up warning, check the liquid levels and
sensor connections. Then push OK or F4 to cancel the warning.
Main Interface
Summary of Contents for MW9600
Page 37: ... 32 Note ...
