Accurate Technology ProScale 950 Series, Operation

Page: 48 / 53

Operation Manual for LCD Digital Readouts Page 48 of 53
Pr35 - Pr38 apply to General Purpose and In-Panel Readouts.
Pr35
– External Key Input 1 ··················································· [0 to 11]
This parameter maps the Auxiliary Key to be activated externally .
Default Value = 0
Pr36
– External Key Input 2 ··················································· [0 to 11]
This parameter maps the Auxiliary Key to be activated externally .
Default Value = 0
Pr37
– Programmable Output Polarity ····································· [0 or 1]
This sets the normal state of the programmable output when not activated and
Circuit board jumper
JP
5
is in position A.
Default Value = 0
Pr38
– Programmable Output Function ···································· [0 to 3]
Selects the function that the programmable output activates on when Circuit
board jumper
JP
5
is in position A.
Default Value = 0
Value of Pr 38 Function
0 No Operation
1 Monitor (Drift) Operation
2 Upper/Lower Limits
3 Go/No Go
Value of Pr 35 & 36 Key
0 None
1 On/Off
2 Units
3 Plus
4 Datum
5 Minus
6 ABS/INC
7 Send
8 F1
9 F2
10 F3
11 F4
Pr 37 Setting Output Polarity
0 Normally Open (NO)
1 Normally Closed (NC)