background image

FEATURES

Drag pressure

Drag pressure

Friction Washer
Drag washer

Friction Washer

Drag washer

EVEN DRAG PRESSURE

THE TWINDRAG

SYSTEM

Traditional fishing reel design applies the drag pressure
to only one side of the spool — resulting in uneven pres-
sure placed on reel components and excessive heat
buildup. The TwinDrag™ system applies equal pressure
to both sides of the spool which distributes the drag
friction over the surface of two drag plates instead of
one. That’s 50% of the total drag pressure on each side,
resulting in a smoother drag with less heat build-up and
a balanced load on reel bearings and spool. TwinDrag™
reels also have extremely accurate drag settings with
very little fluctuation. In fact, ATD reels will fluctuate
less than 1-pound in total drag when line is drawn at
any speed. For example: when the drag is set to 20
pounds on a ATD reel, drag pressure will only vary
between 19.5 and 20.5 pounds, or less!

> Patented TwinDrag™ system

> Billet 6061 - T6 aluminum

> 7 Class-5 ABEC stainless steel ball bearings

> Preset lever with lock and alphanumeric scale

> QuickShift two-speed

> Titanium drag friction washers

> Unhindered free-spool at every drag setting

> Removable spool stud

> AccuDrags

> 2 Anti-reverse dogs

> Stainless-steel gears, springs,

harness lug, head screws

> Power handle - Ergonomic designed 

for comfort and a sure grip

> 2-year warranty

> AccuCare reel service

> Proudly designed and manufactured 

in the USA

> Left-handed models available

1

Summary of Contents for Platinum TwinDrag Reel













Reviews: