Microphone Instructions:
Power Frequency
Display Window
Power Switch
Fm Key
1. The receiver is on, open your hand to automatically scan the
frequency point, not the frequency.
2. change the frequency point is to open the battery Tube Tail Button
inside the choice of changing the frequency point, a total of 30
points can be selected, the frequency point will automatically scan
on the receiver.
3. Drag two words per hand microphone boot length of 6 seconds or
so can be converted to a or B channel. Channels A and B each have
30 frequencies.
4. the use of multiple sets of machines: First turn on a receiver.
Press the button inside the battery Tube Tail (the frequency
selection point button) , then press the hand button to turn on and
off, and wait about 8 seconds for a horizontal line to appear on the
display screen near the receiver antenna on the receiver, there is
sound out of normal use, then lock the receiver on one side, no other
hand can get in the same way. Same thing on the other side.
Receive and transmit all locked frequency, all closed, and then open
another set of the same operation can be locked, multi-use at the
same time, but the use of the process can not use the same
frequency point. The same frequency will interfere.
1. Power Button, Short press-start; Long Press About 2
seconds-power off;
2. Hand Display Screen;
3. Net cover with a protective sponge inside;
4. The battery can be replaced when the lower tube body is
rotated.
5.Transmitting antenna parts, please do not hold hands,
otherwise it will affect the launch effect;
