19
4.5 Low Battery Icon
A low battery indicator icon is shown in the display window of the Integrated outdoor transmitter. When the low
battery icon appears (the battery voltage is lower than 3.6V), replace the batteries in the sensor with fresh
batteries. Never mix old and new batteries, and never mix battery types such as alkaline and lithium together.
5. Display Console Operation
Note:
The console has five buttons for easy operation:
SET
button and
ALARM
button on the right side,
MIN/MAX/-
button,
SNOOZE/LIGHT
and
CHANNEL
/+
button on the top.
5.1 Quick Display Mode
Note:
To exit the Quick Display Mode at any time, press the
SNOOZE
button of the display console.
While in Normal Mode, press (do not hold) the
SET
button to enter the Quick Display Mode as follows:
•
Once for time/second/date, time/week/date and time/week/year
•
Twice for rainfall.
•
Three for pressure
•
Four for outdoor dew point temperature.
1.
Time, Time/Week and Date.
Press the
C or MIN/MAX/-
button to toggle between
time/second/date, time/week/date and time/week/year.
2.
Rainfall.
Press the
C
or
MIN/MAX/-
button to toggle between 1hr 24hr, week, month and total.
To clear the total rain, press the
C
or
MIN/MAX/-
button until total rain is displayed. The total
rain will flash. Press and hold the
SET
button for three seconds until total rain reads 0.0.
3.
Absolute Pressure and Relative Pressure.
Press the
C
or
MIN/MAX/-
button to toggle
between absolute pressure and relative pressure.
4.
Outdoor Dew Point.
Press the
C
or
MIN/MAX/-
button to toggle between temperature, dew
point
and ‘feels like’.
5.2 Set (Program) Mode
While in Normal Mode, press
and hold
the
SET
button for at least three seconds to enter the Set Mode. The
first setting will begin flashing. You can press the
SET
button again to skip any step, as outlined below.
Note:
In the Set mode, press the [+] button or [
-
] button to change or scroll the value. Hold the [+] button
or [
-
] button for three seconds to increase/decrease rapidly.
Note:
To exit the Set mode at any time, press the
SNOOZE
button on the display console.
1. 12/24 Hour Format (default: 24h)
. Press the
SET
button again to adjust the 12/24-hour format setting
(FMT). Press the [+] button or [
-
] button to change between 12 hour and 24-hour format.
2. Change Hour.
Press the
SET
button again to set the hour. Press the [+] button or [-] button to adjust the
hour up or down. Note the PM icon is present during afternoon hours.
3. Change Minute.
Press the
SET
button again to set the minute. Press the [+] button or [-] button to adjust
the minute up or down.
4. Date Format (default: MM-DD): Press
the
SET
button again to enter the day/month format mode. Press
the [+] button to switch between M-D and D-M.
Summary of Contents for DWS5100
Page 1: ...User Manual ACCUR8 DWS5100 Weather Station...
Page 19: ...18 Figure 16...
