Accuphase DP-77, Instruction Manual, Page: 13 / 41

11
TRACK
(PUSH ENTER)
BACK NEXT
TRACK
(PUSH ENTER)
BACK NEXT
Display reverts to
original condition
Keep the
■
button on the
DP-77 depressed for 2 seconds
(Not possible with remote commander)
STOP
■
This lets you set the display brightness
in four steps, from 1 (dark) to 4 (bright).
When power is turned on while a disc is inserted
On : Playback starts automatically.
Off : Unit goes into stop mode.
(Shown for 2 seconds)
Turn to
select
Push to
accept
End setting
mode
Rotate to
select
S T O P
※
Shading in illustration indicates factory default setting.
※
To cancel a setting, press the
■
button. The indication reverts
to the previous setting.
Note
When connected to a preamplifier or other
equipment with different muting times, the
lock-in period of the DP-77 needs to have
sufficient margin, otherwise the start of a track
may be cut off when performing track search.
To prevent this, a pause interval with a
selectable duration of 1 - 5 seconds can be
automatically added to the track start.
During the auto-pause interval, the indication
is shown.
Display
brightness
Default setting: 3
Power-on
play
Default setting: Off
Default setting: Off
Auto-pause
Return
settings to
factory
defaults
S T O P
Push
Rotate
or push ■ STOP button
Setting mode
Selecting the setting item
If you press the ■ STOP button
while selecting an item, the
setting mode is canceled and
the display returns to the
previous state.
Return to item selection
Return to item selection
Return to item selection
Rotate
Rotate
Rotate
Rotate
Rotate
Push
Push
Push
Push
Push
Push
Push
Push
Push
(Dark)
(Bright)
Auto-pause time setting for play start
Return to item selection
Above 3 items are
returned to their
default settings.
Rotate to
select
Rotate to
select
Function Mode Selection
The factory default settings for various functions such as display brightness, power-on play, auto-pause, etc.
can be changed if desired. It is also possible to revert to the factory default settings at any time.
●
To activate the setting mode, hold the
■ S T O P
button on the DP-77 depressed for at least two seconds.
The unit will switch into the setting mode, and the TRACK knob can now be used to select and change
settings.