background image

14

©2009 Johnson Level & Tool

7. Care and Handling

Care must be taken to maintain the accuracy of the instrument.

After each use, the instrument should be wiped clean and kept in
its carrying case.

• Remove dust from the lenses with a soft brush or a nonabrasive

wipe. Never tough the lenses with your fingers.

• Store the instrument in a dust-free area with low humidity.

8. Product Warranty

Johnson Level & Tool offers a one year limited warranty on each its
products. You can obtain a copy of the limited warranty for a
Johnson Level & Tool product by contacting Johnson Level & Tool's
Customer Service Department as provided below or by visiting us
online at www.johnsonlevel.com. The limited warranty for each 
product contains various limitations and exclusions.

Do not return this product to the store/retailer or place of purchase.
Required repair/calibration must be done by an authorized 
AccuLine Pro® service center or Johnson Level & Tool's limited 
warranty, if applicable, will be void and there will be NO WARRANTY.
Contact our Customer Service Department to obtain a Return Material
Authorization (RMA) number for return to an authorized service center.
Proof of purchase is required.

2595H  7/29/09  10:15 AM  Page 14

Summary of Contents for 40-6910

















Reviews: