12
CARE AND MAINTENANCE
Cleaning your Refrigerator
1. Turn the refrigerator temperature control to OFF, unplug the unit and remove the contents,
including shelves.
2. Wash the inside surfaces with a solution of warm water and baking soda. The solution
should contain about 2 tablespoons of baking soda to a quart of water.
3. Wash the shelves with a mild detergent solution.
4. Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe
dry with a clean soft cloth.
5. Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any
electrical parts.
CAUTION:
Failure to unplug the unit could result in electrical shock or personal injury.
Replacing the Lightbulb (MC6BI model)
NOTE:
The bulb should be exchanged with one of the same size, shape, and wattage, as not all
appliance bulbs are suited for your refrigerator.
1. Unplug the appliance from the power supply.
2. Remove the screw located at the back of the light shield with a Phillips head screwdriver. By
pulling the light shield back, remove the tabs attached to the refrigerator, and detach the light
shield.
3. Replace the bulb.
4. To reattach the light shield, push the tabs back in. Align the holes and insert the screw,
tightening as needed.
5. Connect the appliance to the power supply.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
unit if you minimize the number of times the doors are opened. If the power is going to be off for a
longer period of time, you need to take the proper steps to protect your food.
Vacations
•
Short vacations
: Leave the refrigerator operating during vacations of less than three weeks.
•
Long vacations
: If the refrigerator will not be used for several months, remove all food and
unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth,
leave the door open slightly, blocking it open if necessary.
Summary of Contents for MOMCUBE MC2
Page 15: ...15 NOTES ...
