background image

 

 
 
 
 
 
 
 

 

Press the 

key to view the temperature.  

 

Press and hold the         and 

keys for three second to change the temperature display 

between ºC and ºF. 

  Press the       key to turn the light on or off, if your unit has an internal light.

 

 

 

NOTE:

 When you use the unit for the first time or restart the unit after it has been shut off for a long 

time, there could be a few degrees variance between the temperature you select and the one 
indicated on the LED readout. This is normal and is due to the length of the activation time. 
There should not be a problem once the unit has been running for a few hours.

 

Setting Parameters: 

Several temperature parameter settings can be adjusted from the defaults, if you choose to do so. 
To adjust these parameters: 
 
1. 

Press and hold the SET key for 3 second. 

2. 

When the panel displays 

St

, press the LIGHT key, and the panel will display 

Po

.  

3. 

Press the SET key, and 00 will display.  

4. 

Enter the administrator password (55). 

5. 

Press the SET key, and the panel will display 

Po

.  

6. 

Press the      and      keys to select the appropriate parameter (

do2

A5

A6

, etc.). 

7. 

After selecting a parameter, press the SET key to set its value. Use the    and 

 keys to adjust 

the value, the press the SET key to return to the menu. 

8. 

Press the 

key, or press no key for 30 seconds, to exit. The temperature set-point will be 

saved automatically. 

 

A full list of parameters is listed on page 10. These parameters are listed as a reference for service 
technicians, however, several commonly-used parameters are listed on page 9. 

 

Parameter Table: 

ADA404REF, BREF44 (Refrigerator 
models)

 

Temperature Range: 2 C to 8 C (preset at 4 C) 

High Temperature Alarm: Preset at 8 C 

Low Temperature Alarm: Preset at 2 C 

Door Open Alarm: Set at 60 seconds 

ADA305AF, BREF45 (Freezer models)

 

Temperature Range: -30 C to -10 C (preset at  -

25 C) 

High Temperature Alarm: Preset at -15 C 

Low Temperature Alarm: Preset at -35 C 

Door Open Alarm: Set at 60 seconds 

 
 

Summary of Contents for BREF44

















Reviews: