Document No. ZD24010 Rev. B2
NAC1 User Manual
28 of 38
Appendix C: Software ICD (CLI)
C.1. General Comments on the CLI Commands
The CLI is based on ASCII characters.
Default protocol configuration:
-
Baud Rate:
115
,200
-
Parity: None
-
Start Bit: 1
-
Data Bits: 8
-
Stop Bit: 1
-
Flow Control: None
Each setup command is used to:
1.
Set the appropriate parameters according to the full syntax.
2.
View the current system parameters (in this case only the command name is
entered).
For example:
SEO Y<cr>
- Will set the echo ON when used with a terminal application to configure the
system mode.
SEO<cr>
- Will cause the system to reply "
SEO Y
" to indicate that the echo mode is
used in the system.