
18
Troubleshooting Cont.
5.2 Common Functioning Problems and Solutions
1- Power cord is not
properly connected
Verify the Power Cord connector at
the back and the wall outlet
Machine Stop
Working
2- The protection fuse
blows out
Replace the damaged fuse by a
new one
1- Paper tape is jammed
into the paper round track
Press the "Paper Out" button and
take it out, in case were hard to do
it, pull it out manually
2- Piece of paper tape is
stuck into the round track
Carefully remove it from the round
track
Paper Tape
Jamming
3- The paper tape roll is
up side down
Reload the paper roll correctly
1- Paper tape roll is in bad
condition (old, wed, overglued)
Put a new paper tape roll
2- The paper tape is not placed
correctly into the guiders
Reload the paper tape correctly
3- The strapping temperature
is too low or too high
Reset and set up the right
temperature value
Strapping
Problems
4- Excess of bills
Make sure the maximum number
of bills into the bundle is 100pcs
Summary of Contents for AS100
Page 1: ...User Guide Automatic Strapping Machine AS100...
Page 12: ...12 Operation Procedures Cont 1 1 1 2 1 3 1 4...
Page 21: ...21 Notes...
Page 22: ...www accubanker com...